General information
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
- In addition to this article, observe the relevant job descriptions for body repairs!
Information
- The vehicle, components and adhesives must be brought to processing temperature (acclimatized) before getting started. Processing temperature must be maintained for approx. 30 minutes before starting to work on the bonding surfaces .
- Bonding surfaces must be free of oil, grease, old adhesive, rust, dirt and moisture .
- Always wear clean gloves when touching the cleaned surfaces to ensure that no sweat from your hands or dirt is transferred onto the bonding surfaces .