Assembly and endurance strength
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
- The object temperature must be above the minimum recommended processing temperature for the entire specified time period .
- If the minimum processing temperature could not be reached over the specified period, the standing time must be increased as required .
- If the processing temperature is significantly less than the minimum processing temperature, this can cause irreversible damage to the bonded joint. This has a negative effect on the strength of the adhesive .
Information
- Do not put pressure on bonded joints until the required endurance strength is reached .
- If the vehicle is handed over before the specified endurance strength is reached, remind the customer to wait 24 hours before washing the vehicle in a car wash, for example .
The vehicle must not be moved and no further work must be carried out on the vehicle following repair bonding for at least → Time: 30 min .
The structural durability of adhesive tape or adhesive pad is reached according to → Time: 24 h .