LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 791 (6X Body - Equipment Outside - General) >> WM 6X00IN22 Processing of Porsche 2-component window adhesive >> Working with Porsche 2-component window adhesive >> Processing conditions

Processing conditions

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

During processing, the ambient and material temperature must be at least → Minimum temperature: 15°C  and may be max. → Maximum temperature: 28°C  .

Higher processing temperatures reduce the processing time. → Processing time at 23 °C: 10 min 

scientia non olet · About LEMON Manuals