Endurance strength
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
- The object temperature must be above the minimum hardening temperature for the entire specified time period .
- If the minimum hardening temperature could not be reached within the specified time period, the standing time must be increased or additional heat must be applied to the bonded joint .
- If the hardening temperature is significantly less than the minimum hardening temperature, this can cause irreversible damage to the bonded joint. This will have a negative effect on the strength of the bonded joint .
Information
After this time, the vehicle may be driven on public roads and can be handed over to the customer.
Please remind the customer to wait 24 hours before washing the vehicle in a car wash, for example.
The time between joining the components and starting to use them must be at least → Standing time at 23 ° C: 2 h .