LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 789 (42 Rear Wheel Suspension, Drive Shaft) >> WM 429319 Removing and installing rear shock absorber >> Preliminary work

Preliminary work

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. → 4X00IN LIFTING THE VEHICLE
  2. Remove wheel. → 440519 REMOVING AND INSTALLING WHEEL
  3. Remove rear wheel housing liner → 536919 REMOVING AND INSTALLING REAR WHEEL HOUSING LINER .
  4. On vehicles with air suspension, bleed the corresponding air spring using PIWIS Tester II 9818  . → 4301IN BLEEDING AND FILLING THE LEVELLING SYSTEM

    Steel springs

  5. On vehicles with steel springs, pre-tension the relevant steel springs. → 427219 REMOVING AND INSTALLING REAR COIL SPRING