Technical values
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Drive shaft to wheel hub | Step 1 (wheels suspended in mid-air, operate brakes while tightening)/M16 x 72 thread/always use new screws or bolts following removal | Initial tightening | 200 Nm (148 ft. lb.) | ||
| Drive shaft to wheel hub | Step 2 (wheels on the ground)/M16 x 72 thread/always use new screws or bolts following removal | Final tightening | 180° |