LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 789 (42 Rear Wheel Suspension, Drive Shaft) >> WM 420519 Removing and installing rear axle housing >> Subsequent work

Subsequent work

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect lines for final drive → 390119 REMOVING AND INSTALLING REAR FINAL DRIVE .

    Secure cardan shaft to the final drive → 393519 REMOVING AND INSTALLING REAR CARDAN SHAFT .

  2. Install rear silencer → 260119 REMOVING AND INSTALLING EXHAUST SYSTEM .
  3. Install coil springs/air springs on both sides of the vehicle → 427219 REMOVING AND INSTALLING REAR COIL SPRING  → 434319 REMOVING AND INSTALLING REAR AIR SPRING .
  4. Install brake callipers on both sides of the vehicle → 474119 REMOVING AND INSTALLING REAR BRAKE CALLIPER .
  5. Install cover for underbody at the sides → 519319 REMOVING AND INSTALLING COVER FOR CENTRE UNDERBODY .
  6. Fit wheels → 440519 REMOVING AND INSTALLING WHEEL .
  7. Perform suspension alignment → 449503 SUSPENSION ALIGNMENT, COMPLETE .