LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 786 (15 - Engine - Cylinder Head, Valve Control) >> WM 158219 Remove and install the cylinder head cover >> Subsequent work >> Subsequent work for cylinders 4-6

Subsequent work for cylinders 4-6

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit the bracket for the air-conditioning lines.
  2. Fit the camshaft control actuators. → 153719 REMOVING AND INSTALLING THE SOLENOID/HYDRAULIC VALVE (ACTUATORS) FOR THE CAMSHAFT CONTROLLER 
  3. Fit the cable guide of ignition coil wiring harness on the cylinder head cover.
  4. Install the ignition coils. → 282020 REMOVING AND INSTALLING THE IGNITION COILS
  5. Install the high-pressure pump. → 246319 REMOVING AND INSTALLING THE HIGH-PRESSURE PUMP
  6. Install the high-pressure line. → 249019 REMOVING AND INSTALLING THE FUEL LINE (HIGH-PRESSURE)
  7. Fit the reservoir. → 194019 REMOVING AND INSTALLING RESERVOIR
  8. Fill with coolant. → 193817 DRAINING AND FILLING COOLANT
  9. Fit air cleaner housing. → 242519 REMOVING AND INSTALLING AIR CLEANER HOUSING
  10. Fit engine cover.
scientia non olet · About LEMON Manuals