LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 786 (15 - Engine - Cylinder Head, Valve Control) >> WM 156120 Removing and installing valves >> Preliminary work

Preliminary work

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove cylinder head. → 157019 REMOVING AND INSTALLING CYLINDER HEAD 
  2. Remove camshafts. → 150520 REMOVING AND INSTALLING CAMSHAFTS 
  3. Take hydraulic tappets out of the cylinder head and lay them on a clean surface, arranged according to cylinders and valves. Do not interchange components. For details, see → 155920 REMOVING AND INSTALLING VALVE LIFTERS (HYDRAULIC TAPPETS) 
scientia non olet · About LEMON Manuals