Technical values
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw for hydraulic valve for valve lift control | Tightening torque | 6 Nm (4.5 ft lb.) | |||
| Fastening screw for camshaft mounting saddle | Tightening torque | 13 Nm (9.5 ft lb.) | |||
| Fastening screw securing hall sender to cylinder head | M6 x 16 AL9/replace | Initial tightening | 4 Nm (3 ft lb.) | ||
| Fastening screw securing hall sender to cylinder head | Final tightening | +60° | |||
| Fastening screw for camshaft housing | Tightening torque | 13 Nm (9.5 ft lb.) |