Removing valve lifters (hydraulic tappets)
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
The procedure for removing and installing is described for one side as an example. The procedure for the other side is practically identical.
Information
- The pictures shown in this document may differ from the original.
Information
- If the hydraulic tappets are to be re-used, they must be marked according to installation position using a water-resistant felt-tip pen and set aside in such a way that they cannot be mixed up!
- If the hydraulic tappets are to be re-used, they must be installed at the same position!