Removing chain tensioner
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Incorrect handling of crankshafts
- Risk of damage to the timing system
→ Never turn the crankshaft against the rolling direction or when the chain tensioner is removed.
→ Proceed carefully with your work.
→ Only turn the engine at the crankshaft.
→ Observe general warning notes and working regulations.
Information
- The chain tensioner can be removed in any timing chain position.
- The timing chain cannot by dislodged by removing the chain tensioner (screw securing timing chain in place).
- The crankshaft and camshafts must not be turned when the chain tensioner is removed.
Make sure the vehicle cannot start. To do this, switch off ignition and remove ignition key .