Technical values
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Steering gear to front-axle carrier | M12 x 1.5 x 153 thread/always use new screws and nuts following removal | Initial tightening | 80 Nm (59 ft. lb.) | ||
| Steering gear to front-axle carrier | M12 x 1.5 x 153 thread/always use new screws and nuts following removal | Final tightening | +180° | ||
| Intermediate steering shaft to steering gear (universal joint) | M8 x 30 thread/always use new screw or bolt following removal | Tightening torque | 30 Nm (22 ft. lb.) |