Technical values
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Tie-rod ball to tie rod | Counter when loosening and tightening the lock nut on the outer joint | Tightening torque | 90 Nm (67 ft. lb.) | ||
| Tie-rod ball to wheel carrier cone | M12 x 1.5 thread/always use new nut following removal | Tightening torque | 100 Nm (74 ft. lb.) |