LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 783 (48 - Steering) >> WM 488119 Removing and installing tie-rod ball >> Subsequent work

Subsequent work

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit wheel → 440519 REMOVING AND INSTALLING WHEEL .
  2. Perform suspension alignment and make adjustments if necessary → 449503 SUSPENSION ALIGNMENT, COMPLETE .
  3. If installed on the vehicle: Attach new air-guide element to the tie rod.
    G12888338Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 3.1. Push air-guide element -2-  onto the tie-rod ball from the front.

      Check the position of the lock nut -3-  in the cut-out on the air-guide element -2-  .

    2. 3.2. Secure the air-guide element with a new clamp.

      Check that the clamp locks correctly.

      Check that the clamp has locked correctly through the test lugs -1-  in the air-guide element -2- 

      G12888339Courtesy of PORSCHE CARS NORTH AMERICA, INC.