LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 783 (48 - Steering) >> WM 488119 Removing and installing tie-rod ball >> Preliminary work

Preliminary work

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle → 4X00IN LIFTING THE VEHICLE .
  2. Remove wheel → 440519 REMOVING AND INSTALLING WHEEL .
  3. Remove air-guide element from tie rod, if fitted.
    G12888329Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 3.1. Cut through the lower arms of the clamp -1-  at the marked positions using a suitable tool.
    2. 3.2. Remove air-guide element -2-  .