Removing intermediate steering shaft
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
- The sealing bellows and intermediate steering shaft are one unit .
- The sealing bellows cannot be removed from the intermediate steering shaft .
- Do not try to remove the sealing bellows from the intermediate steering shaft!
- Unscrew fastening screw -2-
on universal joint.
Pull intermediate steering shaft -3- off the steering column -1- .
- Unscrew fastening screw -2-
on universal joint.
Pull intermediate steering shaft -1- off the steering gear -3- .
- Press sealing bellows -1-
together on the tabs and press into the interior of the vehicle.
- Remove intermediate steering shaft -1-
by pulling it towards the passenger compartment.