Installing reservoir
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
- Replace O-rings on the cooling system .
- Clean plug connection and coolant hoses before assembly .
- Coat O-rings and coolant hoses with Kluber Plus Gel (Part No. 000.043.205.93) .
- Remove stoppers before fitting the coolant lines and hoses .
- Installation is performed in reverse order.
- 1.1. Tightening torque for reservoir: Tightening torque 5 Nm (3.5 ft lb.)