Subsequent work

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Only for vehicles with distance measuring sensor:
Install control unit for distance measuring sensor. → 278519 REMOVING AND INSTALLING CONTROL UNIT FOR DISTANCE MEASURING SENSOR
Install front air guide. → 192419 REMOVING AND INSTALLING AIR GUIDE
Adaptation of cooling-air flaps:
1. 3.1. Perform cooling-air flap adaptation using PIWIS Tester II 9818 .
2. 3.2. Select Overview → DME → Drive links/checks → Drive links and press [F12]
3. 3.3. Select Radiator shutter and press [F12]
4. 3.4. Start radiator shutter adaptation by pressing [F8].
5. 3.5. Adaptation takes 30 seconds.
6. 3.6. Adaptation complete.