LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 780 (19 - Engine - Cooling) >> WM 193219 Removing and installing motor for cooling-air flaps >> Technical values

Technical values

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION

Location Description Type Basic value Tolerance 1 Tolerance 2
Fastening screw for motor for cooling-air flaps   Tightening torque 2.5 Nm (2 ft lb.)    
scientia non olet · About LEMON Manuals