LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 780 (19 - Engine - Cooling) >> WM 192019 Removing and installing cooling fan housing >> Preliminary work

Preliminary work

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove radiator. → 197019 REMOVING AND INSTALLING RADIATOR 

    Mixing fluids 

    NOTE:
    • Risk of damage to components 

    → Close off all openings immediately after exposing them (with adhesive tape, suitable stoppers).

  2. Disconnect ATF lines.
    1. 2.1. Unscrew screws and disconnect ATF lines.
scientia non olet · About LEMON Manuals