Installing oil pan

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information

When installing the oil pan, make sure that all sealing faces are free of oil and grease.

Installation is performed in reverse order. Pay particular attention to the following:
1. 1.1. Check oil pan seal and replace if damaged.
2. 1.2. Clean the sealing faces.
3. 1.3. Fit the oil pan and screw in fastening screws by hand. Align and tighten oil pan.
  Tightening torque: Tightening torque 10 Nm (7.5 ft lb.)