Technical values: Overview
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Oil-filter cover to oil guide housing | Special wrench, a/f 94/36 (1 ea.) | Tightening torque | 25 Nm (19 ft lb.) | ||
| Oil/water heat exchanger to oil guide housing | M6 x 20 (6 ea.) | Tightening torque | 10 Nm (7.5 ft lb.) | ||
| Fastening screw securing holder to oil guide housing | M6 x 16 | Tightening torque | 10 Nm (7.5 ft lb.) | ||
| Fastening screw securing upper i part of oil pan to crankcase | M6 x30-ZLAl9/replace | Initial tightening | 4 Nm (3 ft lb.) | ||
| Fastening screw securing upper part of oil pan to crankcase | Final tightening | +90° | |||
| Fastening screw securing inside of upper part of oil pan to crankcase | M6 x 25 | Tightening torque | 10 Nm (7.5 ft lb.) | ||
| Fastening screw securing heat shield to oil cooler | Tightening torque | 23 Nm (17 ft lb.) |