Installing oil cooler
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order. Pay particular attention to the following:
- 1.1. Clean sealing surfaces and replace seals.
- 1.2. Tightening torque for oil cooler. Tightening torque 10 Nm (7.5 ft lb.)
- 1.3. Tightening torque for heat shield: Tightening torque 23 Nm (17 ft lb.)