LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 778 (17 - Engine - Lubrication) >> WM 171119 Removing and installing oil level sensor >> Installing oil level sensor

Installing oil level sensor

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1. Replace sealing ring on oil level sensor.
    2. 1.2. Clean the sealing face.
    3. 1.3. Tighten screws to Tightening torque 10 Nm (7.5 ft lb.)  .
scientia non olet · About LEMON Manuals