LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 777 (28 - Ignition System) >> WM 280419 Removing and installing ignition starter switch >> Removing ignition starter switch

Removing ignition starter switch

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove trim panel -1-  on main headlight switch and ignition starter switch.
    1. 1.1. Disconnect electric plug connection -2-  on ignition starter switch light.
    2. 1.2. Unclip locking lugs -a-  and remove trim panel.
      G12834003Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Remove ignition starter switch.
    1. 2.1. Loosen and unscrew union nut -1-  using wrench 9800  .
    2. 2.2. Remove ignition starter switches from trim panel under dashboard at the left.
      G12834004Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Release electric plug connection -a-  and disconnect it.
    G12834005Courtesy of PORSCHE CARS NORTH AMERICA, INC.