Calibrating fuel level sender: Information
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Highly inflammable or explosive materials
- Danger of fire or explosion
→ Avoid contact with hot parts or sources of ignition
→ Use suction to remove ignitable vapors.
→ Attach warning sign in a clearly visible position.
WARNING:
Caustic fluids
- Danger of chemical burns
→ Avoid contact with caustic fluid.
→ Wear personal protective gear.
→ Ensure that there is good ventilation.
→ If you do come into contact, wash off immediately with plenty of warm water and contact a doctor if necessary.
Information
- Calibration of the fuel level sender is required after replacing the fuel tank, the fuel level sender or the instrument cluster. Calibrate the sender - after replacing the instrument cluster - only if the function Read out values cannot be performed!
- The fuel level sender does not have to be calibrated if the battery was disconnected or a plug connection on the instrument cluster or sender was disconnected. The values remain stored in the instrument cluster .
- A range on remaining fuel of less than 15 km (9 miles) is not displayed in the instrument cluster .