LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 774 (55 - Lids, Flaps) >> WM 559119 Removing and installing rear lid hinge >> Installing rear lid hinge

Installing rear lid hinge

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order to removal.
  2. Tighten fastening screw for lid hinge to Tightening torque 10 Nm (7.5 ft lb.)  until secure.
  3. Tighten fastening nut for lid hinge to Tightening torque 23 Nm (17 ft lb.)  until secure.
scientia non olet · About LEMON Manuals