LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 774 (55 - Lids, Flaps) >> WM 558719 Removing and installing upper part of rear lid lock >> Installing upper part of rear lid lock

Installing upper part of rear lid lock

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order to removal.
  2. Tighten fastening screws to Tightening torque 8 Nm (6 ft lb.) Torque angle 45°  until secure.
scientia non olet · About LEMON Manuals