LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 774 (55 - Lids, Flaps) >> WM 557319 Removing and installing actuating cylinder for rear lid >> Function test on rear pneumatic springs

Function test on rear pneumatic springs

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Close and open the lid several times to check that the pneumatic springs are working properly and were fitted correctly.
  2. Open the lid fully. The two fitted pneumatic springs must hold the lid open.
  3. Close the lid.
scientia non olet · About LEMON Manuals