LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 774 (55 - Lids, Flaps) >> WM 555719 Removing and installing rear lid release >> Removing rear lid release

Removing rear lid release

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release and disconnect electric plug connection.
  2. Remove rear lid release  .
    G12834869Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 2.1. At the outer edge of the release switch, insert a plastic wedge no deeper than 2.5 mm  between the release switch -1-  and rear window -2-  as shown - A-  .
    2. 2.2. Push the plastic wedge straight down and unclip the release switch from the retainer plate - B-  .

      Do not use force on the retainer plate.

scientia non olet · About LEMON Manuals