LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 774 (55 - Lids, Flaps) >> WM 553119 Removing and installing front pneumatic spring >> Installing pneumatic spring >> Function test on pneumatic spring

Function test on pneumatic spring

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Close and open the lid several times to check that the pneumatic springs are working properly and were fitted correctly.
  2. Open the lid fully. The fitted pneumatic spring must secure the lid in open position.
  3. Close the lid.
scientia non olet · About LEMON Manuals