Preliminary work
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
Use a marking pen to mark the position of accessories with respect to each other before removal in order to reduce the amount of adjustment work required for gaps and joints.
- Remove front lid. → 552219 REMOVING AND INSTALLING FRONT LID
- Remove upper part of lid lock. → 551819 REMOVING AND INSTALLING UPPER PART OF FRONT LID LOCK
- Remove front lid seal. → 553319 REMOVING AND INSTALLING FRONT LID SEAL
- Remove front logo. → 660719 REMOVING AND INSTALLING FRONT LOGO
- Remove insulation from rear lid. → 700419 REMOVING AND INSTALLING INSULATION FOR FRONT LID