Securing lid (service position)

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information

Make sure that the bonnet stay is engaged correctly .
Check that the bonnet stay is seated correctly .

When carrying out service work on the vehicle, the special tool bonnet stay 9873 can be used in addition to the standard pneumatic spring.
Position bonnet stay.
1. 2.1. Position bonnet stay -1- and clip it into the ball joint at the top and bottom.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Once service work is complete, install pneumatic spring → 553119 REMOVING AND INSTALLING FRONT PNEUMATIC SPRING - "INSTALLING" .