LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 774 (55 - Lids, Flaps) >> WM 551419 Removing and installing cable for front lid lock >> Installing lid-lock cable

Installing lid-lock cable

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Check that the clips are not bent or broken.

Check that all clips are positioned fully and correctly.

Replace damaged or missing clips with new ones.

Installation is performed in reverse order. Pay particular attention to the following: 

  1. Tighten fastening screws to the specified torque. Tightening torque 10 Nm (7.5 ft lb.) 
scientia non olet · About LEMON Manuals