Instructions for handling batteries
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
- Battery terminals do not need to be greased.
- The battery terminal clamps should only be attached by hand - without excessive force - to prevent damage to the battery.
- The tightening torque for the battery terminals is → Torque: 5 Nm (3.5 ft lb.) .
- If the battery is reconnected, proceed according to → 2X0000 Work instructions after disconnecting the battery.