LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 773 (27 - Starter, Power Supply, Cruise Control) >> WM 270519 Removing and installing battery sensor >> Installing battery sensor

Installing battery sensor

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information 

After replacing the battery sensor, the battery sensor will be detected automatically by the gateway control unit.

  1. Installation is performed in reverse order to removal.
  2. Tighten fastening nut securing ground strap to the body. Tightening torque 18 Nm (13 ft lb.) 
  3. Tighten terminal clamp on ground strap. Tightening torque 5 Nm (3.5 ft lb.) 
scientia non olet · About LEMON Manuals