Subsequent work

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information

Calibrate the vehicle after installing or replacing the combination sensor.

Calibration must only be performed when the vehicle is positioned horizontally and the brake is not actuated .

Install left front seat → 720119 REMOVING AND INSTALLING FRONT SEAT .
Calibrate the combination sensor (includes lateral and axial acceleration sensor) using PIWIS Tester 3 9900 .
Select PSM >> Maintenance/repairs >> PSM sensor calibration >> Calibrate axial-acceleration sensor and Calibrate lateral-acceleration sensor in the menu.