Installing hydraulic unit
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order.
Observe specified tightening torques:
Only for left-hand drive (LHD) vehicles:
Brake lines to hydraulic unit: Tightening torque 14 Nm (10.5 ft. lb.)
Only for right-hand drive (RHD) vehicles:
Brake lines (from brake calliper) to hydraulic unit: Tightening torque 14 Nm (10.5 ft. lb.)
Brake lines (from brake master cylinder) to hydraulic unit: Tightening torque 18 Nm (13 ft. lb.)