Subsequent work

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

If the level sensor was replaced, calibrate the level sensor and adjust it if necessary.
1. 1.1. Connect the Porsche System Tester to the vehicle and start the System Tester. Switch on ignition.
2. 1.2. For vehicles without PASM:
  - With halogen headlights: Front-end electronics , Maintenance/repairs , Teach headlight levelling system must be selected.
  - With Xenon/LED headlights: Front-end electronics , Maintenance/repairs , Headlight start-up must be selected.
3. 1.3. For vehicles with PASM, calibrate levelling system. → 430115 CALIBRATING THE LEVELLING SYSTEM
4. 1.4. Read out fault memory.
5. 1.5. Adjust the headlight if necessary. → 941516 ADJUSTING HEADLIGHTS