LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 771 (43 - Level Control, Air Suspension) >> WM 430115 Calibrating the levelling system >> Calibrating the levelling system >> Notes on calibration

Notes on calibration

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

The nominal values for the nominal heights of the level sensors are stored in the control unit. The actual values of the respective axle heights, front left, front right, rear left, rear right, have to be measured manually and then entered using the Porsche System Tester. The actual values must be measured on the front and rear axle, both on the left and right. → 430115 CALIBRATION " - Height measurement point on rear axle; - Height measurement point on front axle

See also: → 430115 CALIBRATION  "Information" - Conditions for carrying out calibration

scientia non olet · About LEMON Manuals