Technical values
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screw for clamp | Tightening torque | 10 Nm (7.5 ft lb.) | |||
| Union nuts for high-pressure lines | After opening the conical/ball joints, always replace high-pressure line with the latest type | Initial tightening | 8 Nm (6 ft lb.) | ||
| Union nuts for high-pressure lines | After opening the conical/ball joints, always replace high-pressure line with the latest type | Final tightening | +50° |