LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 770 (24 - Fuel System - Electronic Ignition) >> WM 247019 Removing and installing DME control unit >> Installing DME control unit

Installing DME control unit

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order to removal.
  2. Tighten fastening screws securing cover to fuse box housing. Tightening torque 3.5 Nm (2.5 ft lb.) 
  3. Tighten fastening screws securing filler neck to the body. Tightening torque 7 Nm (5 ft lb.)