Installing intake-air distributor
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
Replace sealing rings, seals and O-rings.
- Replace seals -2-
on the intake-air distributor -1-
.
- Install intake-air distributor -1-
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
- Tighten screws -1 to 8-
according to the specified tightening sequence. Tightening torque 10 Nm (7.5 ft lb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Further installation is performed in reverse order.