LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 770 (24 - Fuel System - Electronic Ignition) >> WM 244219 Removing and installing throttle housing >> Installing throttle housing

Installing throttle housing

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the condition of the sealing ring. Replace sealing ring if necessary.
    G12833813Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Position throttle housing.
    1. 2.1. Fit and tighten screws.
      G12833814Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Fit connector -1-  on the throttle housing and insert cable into the clip.
    G12833815Courtesy of PORSCHE CARS NORTH AMERICA, INC.