Subsequent work
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Clean remaining fuel from the high-pressure system before starting the leak test.
- Fit fuel collection pipe. → 243019 REMOVING AND INSTALLING FUEL DISTRIBUTOR PIPE
- Perform a leak test on the high-pressure system. → WM 200101 CHECKING FUEL SYSTEM (HIGH-PRESSURE SIDE) FOR LEAKS .
- Fit intake-air distributor. → 244619 REMOVING AND INSTALLING INTAKE-AIR DISTRIBUTOR
- Connect the battery.
- Perform a test drive. Make sure the high-pressure pipes and threaded joints are sealed properly (visual inspection with engine running).
- Read out engine control unit fault memory after completing the work and print log. Compare with the previous log.