LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 770 (24 - Fuel System - Electronic Ignition) >> WM 243519 Removing and installing throttle-housing cover >> Installing throttle-housing cover

Installing throttle-housing cover

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order.
    1. 1.1. The throttle valve air box must always be replaced after loosening the screw-type clamp.
    2. 1.2. Tightening torque for screw-type clamps: Tightening torque 5.5 Nm (4 ft lb.) 
scientia non olet · About LEMON Manuals