LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 769 (82 Auxiliary Heating) >> WM 825419 Removing and installing fuel line - rear underbody to fuel pump >> Removing and installing fuel line - rear underbody to fuel pump >> Installing fuel line from rear underbody to fuel pump

Installing fuel line from rear underbody to fuel pump

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order.
  2. The fuel system must also be pre-filled. To do this, connect PIWIS Tester II 9818  to the vehicle.
  3. Switch on ignition.
  4. Select the vehicle type and start the PIDT.
  5. Select the auxiliary heater  control unit in the overview  .
  6. Maintenance/repairs  must then be selected.
  7. Line filling  must now be selected. Then press Next.
scientia non olet · About LEMON Manuals