LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 769 (82 Auxiliary Heating) >> WM 824519 Removing and installing fuel pump for auxiliary heating >> Removing and installing fuel pump for auxiliary heating >> Installing fuel pump for auxiliary heating

Installing fuel pump for auxiliary heating

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order.
  2. The fuel system must also be pre-filled. To do this, connect PIWIS Tester II 9818  to the vehicle.
  3. Switch on ignition.
  4. Select the vehicle type and start the PIDT.
  5. Select the auxiliary heater  control unit in the overview  .
  6. Maintenance/repairs  must then be selected.
  7. Line filling  must now be selected. Then press Next.
scientia non olet · About LEMON Manuals