Further to 3: Fitting the wheel on the vehicle

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information

Never use an impact bolter .
Observe the description on wheel removal and installation (fitting wheel on vehicle) → 440519 REMOVING AND INSTALLING WHEEL .
Fit the wheels with the lowest residual imbalance values on the front axle. Observe the rolling direction of the wheels .

Fit wheel using a suitable commercially available tool.
Screw in wheel bolts by hand and then tighten evenly. Start at the top when tightening. Always observe the specified tightening torque of 160 Nm (118 ft. lb.)
Set required tyre pressure (tyre-pressure plate).